Cleaning & Maintenance of Your Floors
One of the benefits of Karndean Designflooring is the straight-forward cleaning and maintenance regime.
Karndean Designflooring doesn't trap dirt like many natural and fabric materials. We treat all our products with the KGuard+ system. This is a simple Pu (polyeurethane) coating that helps to defends against scuffing and scratching. It also means that the floor does not need to be sealed after installation.
K Guard +
Karndean’s surface protection system, K Guard +, uses PU technology to ensure that there is no need to apply an additional surface treatment following installation. It also works as a barrier against scuff marks, stains and fine scratches for the coming years.
Cleaning after installation
1. Remove all loose debris from the floor using a vacuum, brush or dust mop.
2. Ensure that all dry adhesive is removed from the surface.
3. Damp mop with a pH neutral detergent or if machine cleaning (<450rpm) use a 3M red pad (or equivalent) or scrubber dryer to clean the floor.
The commercial cleaning and maintenance regime is simple and can be carried out by hand or using mechanical cleaning apparatus.
1.Vacuum, sweep or mop to remove all dust and loose debris.
2. Damp mop with a neutral detergent or if machine cleaning (<450rpm) use a 3M red pad (or equivalent) or scrubber dryer to clean the floor.
3. Stubborn stains can be removed by spot cleaning with concentrated neutral detergent and a 3M red pad (or equivalent).
Avoid dragging or sliding heavy items of furniture, carousels and point of sale across the floor.
It is important when designing and installation that the appropriate entrance matting systems are used. Most manufacturers recommend a total of six paces, though this of course is dependant on the application and the space available. At the very least we recommend a non-rubber back matting such as Turtle Mats.
Mop up spillages quickly to prevent stains.