Maintain Your Floor
Karndean uses PU technology to ensure that there is no need to apply an additional surface treatment following installation. It also works as a barrier against scuff marks, stains and fine scratches.
Depending on how heavily the floor is used, if at any time there is a need to revitalize the floor this can be done using Karndean's Remove and Refresh products.
Apply Karndean's coating by following these steps:
- Vacuum, sweep or dry mop to remove all dust and loose debris (if using a vacuum, please check the manufacturer's guidelines to make sure it's suitable for Karndean)
- Use the Karndean Remove (diluted as applicable) to strip off all grease and ingrained dirt
- Rinse the floor well
- Apply 2 to 3 thin coats of Refresh allowing each coating to be fully dry before the next coat is applied
- Do a routine maintenance cleaning